Heat Exchangers Finned Tubes & Radiators

Heat Exchangers Finned Tubes & Radiators

Fin Tubes

Type : Spirally Crimped, Tension Wound Fins on Tubes of MS, SS, Copper, Brass.& Aluminum

Fin material : MS, Copper, SS & Aluminum

Purpose :  To increase contact surface area of tubes for better heat transfer.

Size : Tubes 8 mm OD to 100 mm OD, Fin height 5 mm to 25 mm,Fin pitch 2 FPI to 10 FPI

Application : To make Radiators, Cooler, Thermic fluid Heat Exchanger.

Radiatros / Coolers

Type : Manufactured from fin tubes assembled in header, hot / cold, liquid or gas flows inside tubes and air flows through fin.

Heat Transfer Area : up to 500 m2.

Heat Transfer Capacity : Up to 3,00,000 Kcal / Hr.

Condenser / Heat Exchanger

Floating Head type shell & tube type Two pass / Four pass in M.S. / S.S. & S.S. / S.S. Furnace area from 10 M² to 600 M² Evaporators & Economizer from 20 M² to 350 M².

Modular Design Steam Radiator

Specialized for any capacity from 20 M² Area to 200 M² Area for required pressure. Easy to replace & clean the module.

Type : Manufactured from fin tubes assembled in header, hot / cold, liquid or gas flows inside tubes and air flows through fin.

Heat Transfer Area : up to 500 m2.

Heat Transfer Capacity : Up to 3,00,000 Kcal / Hr.